Elevator Rod End Gage

IMG_4619

IMG_4625

The Rod End Gage is intended for initial alignment of the MD3614M rod end used on the RV elevators. Note the top picture is not a MD3614M rod end, but a similar rod end used for illustration.  The gage uses an AN3 bolt that you supply to accurately locate the 13/16 initial height of the bolt hole from the mounting surface.  If you have to add a doubler per SB 14-02-05, the distance should be 3/4″.  Just flip this gage over and you have a precise 3/4″ distance.

The gage is relieved for rivet heads.

$19.95 plus shipping