The 1-0100-00C is a new Porter Cable 892 router. We disassemble it and replace the problem prone standard nose bearing with a 40,000 rpm rated ceramic bearing.
We shorten the power cable, we add an adapter to adapt the Porter Cable collet system to an industry standard ER11 collet system.
The new Porter Cable collet system may have run out of as much as .008″ which can result in broken end mills or poor cut finish. We regrind the Original collet bore or clock the original 1/2″ collet as required for a run out of less than .002 inches at the ER11 collet bore.
These routers are applicable to the Panel Pro 4824 and 5624 models.